Extracting Alginate from Kelp

"Alginate" is the term usually used for the salts of alginic acid, but it can also refer to all the derivatives of alginic acid and alginic acid itself; in some publications the term "algin" is used instead of alginate. Alginate is present in the cell walls of brown algae as the calcium, magnesium and sodium salts of alginic acid. The goal of the extraction process is to obtain dry, powdered, sodium alginate. There are two main methods of recovering the alginate from kelp:

The first is to add acid, which causes alginic acid to form; this does not dissolve in water and the solid alginic acid is separated from the water. The alginic acid separates as a soft gel and some of the water must be removed from this. After this has been done, alcohol is added to the alginic acid, followed by sodium carbonate which converts the alginic acid into sodium alginate. The sodium alginate does not dissolve in the mixture of alcohol and water, so it can be separated from the mixture, dried and milled to an appropriate particle size that depends on its particular application.

The second way of recovering the sodium alginate from the initial extraction solution is to add a calcium salt. This causes calcium alginate to form with a fibrous texture; it does not dissolve in water and can be separated from it. The separated calcium alginate is suspended in water and acid is added to convert it into alginic acid. This fibrous alginic acid is easily separated, placed in a planetary type mixer with alcohol, and sodium carbonate is gradually added to the paste until all the alginic acid is converted to sodium alginate. The paste of sodium alginate is sometimes extruded into pellets that are then dried and milled 1


1. http://www.fao.org/docrep/006/y4765e/y4765e08.htm .